Interior

Console-mounted phone holder sized for an iPhone 12 Mini with a protective case. The creator explicitly states Alfa Romeo Stelvio and Giulia fitment and recommends PETG or ABS because cabin heat can deform PLA. Confirm device clearance and secure retention before driving.

Strengthened MiTo console phone-holder adapter with a 17 mm ball for compatible mounts such as the Baseus Metal Age Gravity CD holder. The remix removes internal voids and recommends 100% infill or ten wall loops. The creator printed PETG-CF and explicitly recommends PETG, ASA or ABS rather than basic PLA.

Reinforced MiTo console phone-holder adapter remix that removes internal voids after the creator's print of the ancestor failed during bed removal. The source recommends 100% infill and reports PETG-CF experience. PETG or ABS is listed in the catalogue; verify the ball/socket interface and use dense walls or solid infill.

Console adapter for an aftermarket mobile-phone holder in an Alfa Romeo MiTo. The creator instructs left-hand-drive users to mirror the model before printing. PETG or ABS is inferred for cabin heat and sustained phone load. Verify handedness and the aftermarket holder interface before use.

Console mount designed for a Baseus magnetic wireless charger in an Alfa Romeo MiTo. Optional double-sided mounting tape may be added for grip. The CC BY-NC-SA source remains eligible only while the catalogue is free and noncommercial. PETG or ABS is inferred for cabin heat.

Console-mounted base for a magnetic phone holder, designed specifically around the Alfa Romeo MiTo central fascia. The printed base accepts the magnet from the creator's linked commercial holder. PETG or ABS is functionally inferred for cabin heat; compare the clamp surfaces and magnet screw before use.

Small card holder explicitly designed for Alfa Romeo 159, Brera and Spider interiors. PETG is inferred for cabin heat and toughness; ABS is an alternative. Confirm placement does not obstruct controls or airbags.

Alfa romeo arm rest upper button . As you know stock part after some years it brakes.. Download it and print it. Cheers!

Update 27/04/17 due to the heat of the last days, even if printed in ABS, the e-cig holder had shrink issues in the car. so I redesigned it, improved the comfort and the anchoring sturdiness. ---------------------------------------- first release I needed a e-cig holder in my car. so you can find my design. suggestion to improve its functionality are welcomed!

I made this holder for my iPhone 4s and 5s, fit for Alfa Romeo 147 cup holder. Use the holder without bumper, I only use 0.3mm thin case. How to use: Put the holder into the cup holder, and turn right to lock.

Replacement for the stock dashboard drawer slot that provides a phone-holder position. The source supplies a clean blank variant and a custom variant for a 76 × 14 mm handset plus a disassembled Bluetooth/FM adapter, and explicitly states Alfa Romeo 147 and GT fitment. The creator recommends PETG-CF to reduce heat warping; PETG is the closest supported catalogue material. Confirm accessory dimensions and isolate any added electrical wiring safely.

Two-piece phone holder for the dashboard CD slot, comprising the slot insert and a handset cradle sized by the creator for a OnePlus 8 with a case. The source explicitly states Alfa Romeo GT and 147 fitment and requires two M4 screws. Print in PETG for cabin heat, confirm the 80 mm mounting-hole spacing, and redesign only the handset cradle for other phones.

Cabin accessory that fits the cupholder position and holds a box-shaped handheld device. The source explicitly states Alfa Romeo 147 and GT fitment. PETG is recommended here for a sun-heated interior; verify the 70 mm holder envelope and device clearance before use.

Two-piece drink holder designed and installed for a 1999 Alfa Romeo 156 2.0 Twin Spark. Bond the base and holder together, then attach the base with automotive-grade double-sided adhesive as the creator describes. PETG is inferred for cabin heat and toughness; ABS is an alternative.

Accessory holder for a 250 ml European can in a 1998 Tipo 916 Spider. It mounts through the 12 V socket adapter; the creator notes that one wrap of tape may be needed if the socket fit is loose. The source geometry does not include the photographed laser-marked logo.

Replacement actuator finger for the glovebox latch. The creator made it for a Giulia Quadrifoglio after the original plastic actuator failed. Check latch release and retention before closing the glovebox.

Storage shelf fitted ahead of the gear lever above the DNA selector area on 2013-on vehicles. The creator shows it installed and reports printing without supports with adequate cooling. Keep the selector and adjacent controls fully accessible.

Press-fit holder for a slim beverage can in the center console. The creator designed and physically fit-tested it in a 2018 vehicle. Confirm stable retention and keep the container clear of the handbrake and controls.

Can holder sized for a 0.5-litre, 67 mm can and designed for the 159.

Adjustable phone holder designed and measured on a 2018 vehicle, with 13 mm and 16 mm frame variants. The creator recommends PETG after a PLA version deformed in a hot parked car.

Replacement clip-in latch for the overhead sunglasses holder. The creator developed it through several fitting iterations and specifies ABS or nylon for cabin heat.

Two center-armrest storage tray variants: plain and with coin compartments. The creator recommends adding double-sided rubber inside to stop objects sliding.

Two-piece folding grocery holder designed by Carlos Solis for the Giulia trunk. It bolts to the factory mounting location, folds out of the way, and the creator printed it in PETG for heat resistance.

Replacement retaining pin designed by Mikael Tonialini for the luggage cover of a 156 Sportwagon. The creator recommends 100% infill and removing the central print support after printing.