Interior

Two-file replacement set for the outer and centre HVAC control knobs. Both validated STL variants are required because the centre control and outer controls use distinct geometry. The source identifies the Alfa Romeo 4C application directly but provides no year or trim split. PETG or ABS is functionally inferred for cabin heat, repeated handling and dimensional stability; compare each shaft interface before installation.

Two-piece MiTo shifter knob comprising the main knob and its top insert. The source notes there are no modeled threads and instructs the user to form the fit by carefully screwing it on by hand. PETG or ABS is inferred for cabin heat and repeated handling. Confirm shaft diameter and secure engagement before driving.

Dashboard/vent mount sized for a 52 mm boost gauge and explicitly designed for the Alfa Romeo MiTo. PETG or ABS is inferred for cabin heat and gauge weight. Confirm the 52 mm gauge body and surrounding trim clearance before installation.

Replacement manual gear knob tested by the creator on an Alfa Romeo MiTo. The compact binary STL is the canonical upload; an equivalent larger ASCII STL representation is preserved in the archive. PETG or ABS is inferred for cabin heat and handling durability. Confirm the shaft engagement before driving.

Replacement gearshift knob. The creator printed the design in ABS and smoothed it with acetone vapor. Confirm bore engagement, shift-pattern orientation and secure retention before driving.

Replacement radio frame for a two-DIN head unit. ABS is inferred for dashboard heat and dimensional stability; PETG is an alternative. Compare the radio and dashboard openings before printing.

Adapter for installing a Honda S2000 starter button in Alfa Romeo 159, Brera and Spider interiors. Verify switch retention, wiring isolation and unobstructed operation before use. ABS is inferred for dashboard heat and rigidity; PETG is an alternative.

Replacement panel for the factory-radio dashboard opening when fitting a two-DIN stereo. The creator directly identifies Alfa Romeo 159 fitment; tentative Brera and Spider wording is withheld. ABS is inferred for dashboard heat and rigidity; PETG is an alternative.

Replacement grid component for the climate-control vent. ABS is inferred for rigid dashboard geometry and cabin heat; PETG is an alternative. Compare vane clearance and movement with the original before installation.

Replacement fascia for fitting an aftermarket two-DIN stereo where the supplied trim did not fit the dashboard opening. The creator supplies an STL and explicitly permits 3D printing. ABS is inferred for dashboard heat and rigidity; PETG is an alternative.

rondella per vite sotto volante , ideale per chi vuole cambiare il colore o rimpiazzare la vecchia

Pretty much what the title says. Designed from scratch. It's a frame to adapt the Sony DSX-A410BT autoradio on a Alfa Romeo 147

I made this 5 speed lift gearknob for my Alfa Romeo 147 1.9 JTD (2006). Printed with FTD IB Black, and FTD SW (dropped in the numbers). Two versions: Alfa knob for FDM printers. Alfa knob SLA_DLP is hollowed with two holes.

Replacement loop insert for a broken Alfa Romeo 147/156 key fob, with both models explicitly identified by the creator. PETG is inferred for repeated key-ring flexing and impact; nylon is a tougher alternative.

Replacement CR2032 battery tray for an Alfa Romeo 156 key fob. The creator says it might fit other models, but those generations are withheld without corroboration. PETG is inferred for snap-fit toughness; PLA is an alternative for light use.

Latest source revision of a clip-on paddle-shifter extension for Alfa Romeo 156 Selespeed controls. PETG is inferred for repeated handling and cabin heat; ABS is an alternative. Confirm secure retention and unobstructed steering-wheel movement before driving.

Bracket for mounting a 3.5-inch speaker in the dashboard of an early Alfa Romeo 33 Series 1 (1983–1986). Confirm speaker diameter, depth, wiring clearance and secure attachment before installation.

Replacement bracket for the electrical connectors on the instrument cluster of a 1989 Alfa Romeo Spider. Compare the source images and original bracket before installation; support is required for the source orientation.

Two source-provided replacement connector variants for the cabin heater vents in 1970–1976 Alfa Romeo 2000 GTV/unificato Bertone coupes. Compare the original connector and select the matching variant before installation.

Replacement spacer for the speedometer drive where the cable connects on Alfa Romeo Tipo 105 cars. The creator copied an original spacer, printed it in ASA, and reports successful fit and operation.

Replacement clamp/spacer securing heater-control cables to the heater levers in Alfa Romeo Tipo 105 and 115 cars. The creator printed PETG at full infill and suggests checking shrinkage and lever movement after installation.

Finishing fascia for an Android two-DIN radio in the 159. The creator gives an 11.5 × 19.2 cm radio size, a 13 × 20.2 cm dashboard opening, and printed it in black PETG.

Panels, connector cap, and switch plate for relocating an OBD-II socket inside the driver-side storage compartment while allowing the compartment to close.

Replacement clip for a broken hinge pin on the dashboard storage-bin lid. The creator specifies 0.2 mm layers, 100% infill, side orientation and supports.