Giulietta Tipo 116

Protective cover for the windscreen-wiper arm retaining nut on a Type 116 GTV6. Confirm nut clearance and secure engagement before driving.

Replacement seat-adjustment grip for Type 116 GTV interiors. Test the bore and lever engagement by hand before applying adjustment force; the creator's possible GTV6/75/Milano compatibility is not treated as confirmed fitment.

Replacement center cap for a 4×98 Ronal A1 wheel used on Type 116 GTV models. Confirm the wheel model, center-bore dimensions and retention fit before road use; the included STL is the directly printable source variant.

Replacement interior door-handle cover for Type 116 GTV models. The creator notes that the small retaining legs can remain fragile; inspect clip engagement and avoid forcing the cover during installation.

Replacement bracket for the bonnet prop on Type 116 GTV/GTV6 models. The creator printed it in ABS and installed rivet nuts in the original mounting holes so the bracket can be retained with M6 flat-head hex screws; verify mounting security before working under the bonnet.

Remixed headlamp alignment cup narrowed by 5% and modified to accept both rectangular and round headlamp pins for Alfetta GT, GTV and GTV6 applications. Compare the pin form and adjustment range with the original before installation.

Replacement trim surround for the manual moonroof lever. The creator directly copied an original GTV6 part and notes that these surrounds become brittle with age. The unverified number mentioned by the creator is deliberately not assigned as an OEM association.

Replacement headlight alignment cup designed by Houstin Lichtenwalner for a 1985 GTV6. It works with the original screw to pull or push the headlamp during alignment. The creator reports successful versions in Taulman Bridge nylon and recommends a robust material.

Replacement clip for the sunroof mechanism. The creator reports a successful test on one car and specifies PLA, a 0.8 mm nozzle, and 100% infill.